WHITE
WE RECOMMEND ALSO USING
DAMP X
DRY BLOCK
PRODUCT DESCRIPTION
Damp X Dry Block Waterproofing is a single component acrylic primer and barrier for treating rising damp and penetrating moisture in plaster, cementitious and fibre cement surfaces. It forms a tough, water-resistant film with good adhesion to both damp and dry surfaces.
PRODUCT BENEFITS
Treats and prevents rising & penetrating damp
Forms a dense impenetrable layer to prime and seal damp
Excellent adhesion to damp & dry surfaces
Protects paint from peeling caused by damp
Easy application
Quick drying
Easy clean-up of tools using water
Low odour
Low VOC
SPEADING RATE
Smooth surface: 5.5 – 9 m² / litre per coat: WFT (wet film thickness): 115 ‐ 180 µm, DFT (dry film thickness): 50 ‐ 80 µm, depending on surface porosity, profile and application tools.
DRYING TIME
Touch dry: 1 hour @ 23°C
Recoating time: 6 hours @ 23°C
Overcoating time with topcoat: 24 hours after Damp X Dry Block Waterproofing final application @ 23°C
CLEANING
Do not allow the product to dry on equipment. Equipment is readily cleaned using water. Some detergent may be added to water to facilitate clean up.
PRODUCT SIZE
5 L & 20 L
DOCUMENTATION
